美國Control-line手動泵您當前的位置：首頁 》 產品中心 》 液壓手動泵 》 美國Control-line手動泵
點擊數：1617雙聯手動泵
TANDEM PUMPS
Tandem configuration pumps combine any two modular pumps into a single unit. This configuration can yield up to three different displacements and is available with common or separate inlets and outlets. Reservoirs and mounting plates can be added to complete the package. All of the same standard and optional features from the 500/550 series are included in the tandem pumps. A special handle assembly is provided as standard to operate both pumps or just one. Triple and quadruple units are also available consult the factory for details.
STANDARD FEATURES
- All steel construction for rugged use.
- Rod wiper (except 1-1/2" bore) to exclude dirt.
- All o-ring seals – no fiber or metal seals to leak.
- Self-retained release screw, which cannot be accidentally removed.
- Capable of operating in any mounting orientation.
- Heat treated pins and linkages for extended life.
- Ground pistons to prevent seal extrusion.
- Nitrotec treated pistons for corrosion resistance.
OPTIONAL FEATURES
- Optional seals for pumping alternate fluids.
- Manifold mounting for inlet and/or outlet.
- Operating handle length – 18 or 36 inches for various handle forces.
- Custom designs for your particular application requirements.
TANDEM ORDERING INFO
Standard configuration is for a common inlet and common outlet, if required a common inlet with separate outlets is available – consult factory.